BC-2AP-MD Mag Drive Pump

March Pumpís BC-2AP-MD centrifugal sealless magnetic drive pumps constructed from Polypropylene ideal for chemical applications.
Unit System 60Hz 50Hz
Max Flow 5 GPM 18.5 LPM
Max Head 13 FT 2.7 M
Power .025 HP .018 KW
Electrical 115V 50/60HZ or 230V 50/60HZ

Type Centrifugal Mag Drive
Inlet 3/4"OD
Outlet 1/2"OD
Wet End Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washer)

Request Additional Product Info

icon March BC-2AP-MD Curve

icon BC-2AP-MD Pump Manual


Housings: Polypropylene or Delrin

O-Ring: Buna N, Viton, or Ethylene Propylene

Shaft: Ceramic or 316 Stainless Steel

Impeller: Polypropylene or Delrin

Reference Information

icon Dimensional Drawing BC-2AP-MD 115V

icon Dimensional Drawing BC-2AP-MD 115V DWG (96 KB)

icon Dimensional Drawing BC-2AP-MD 230V

icon Dimensional Drawing BC-2AP-MD 230V DWG (96 KB)

March Pump's industrial BC-2AP-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 5 gallons per minute at 2 feet, and its maximum head is 13 Feet (or around 5.5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, and Ceramic. The inlet connection is 0.75 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.025 Horsepower blast cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March BC-2AP-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March BC-2AP-MD is suitable for your application, please contact March Pump. 

Perfect for Applications Including 

Applications for the BC-2AP-MD Mag Drive include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioners .

Great for Chemicals Including

The BC-2AP-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.  The BC-2AP-MD may have been modified to handle these chemicals.  Please contact March Pump to review your application before using the BC-2AP-MD for any of the above listed chemicals. 
Chemical Resistance Chart     



March Manufacturing Inc. Warranty and Warranty Registration


Search Our Pumps Distributor Map