TE-10K-MD Mag Drive Pump
|Max Flow||200 GPM||757 LPM||172 GPM||654 LPM|
|Max Head||160 FT||48.7 M||112 FT||34.1 M|
|Power||10 HP||7.46 KW||10 HP||7.46 KW|
|Electrical||3Ph 208/230/460V 60HZ & 190/220/380V 50HZ|
|Type||Centrifugal Mag Drive|
|Wet End||Natural Kynar (Front Housing, Rear Housing), Carbon Filled Kynar (Impeller), Viton (Gasket), Carbon (Bushing), Ceramic (Shaft, Thrust Washers)|
|Motor Options||Available in 10HP Explosion Proof and 575V|
|Note||Product image may be different than actual product received.|
Gasket: Viton, Teflon Encapsulated Viton, or EPDM
Imp. Bushing: Carbon or Mica-Teflon (2 necessary)
* For Explosion Proof Drawing, please contact March.
3D Drawings Available in Step Format
March Pump's industrial TE-10K-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 200 gallons per minute at 70 feet, and its maximum head is 160 Feet (or around 70PSI). The standard wet end (the materials that come into contact with the solution) is composed of natural Kynar (PVDF), carbon filled Kynar (PVDF), Viton, Carbon, and Ceramic. The inlet connection is 3 inch male pipe thread, and the outlet is 2 inch male pipe thread. The standard motor is a 3 Phase 10 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-10K-MD centrifugal magnetic drive pump is capable of handling mildly, or highly corrosive chemicals, acids, and solvents. To determine if the March TE-10K-MD is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the TE-10K-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, deionized water systems, scrubber systems, detergent mixers, computer cooling, waste treatment plants, and plating operations.
Great for Chemicals Including
The TE-10K-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide, Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The TE-10K-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the TE-10K-MD for any of the above listed chemicals. Chemical Resistance Chart
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov