TE-10K-MD-1750 Low NPSH Pump

March Pumpís TE-10K-MD-1750 centrifugal sealless magnetic drive pumps constructed from Kynar ideal for chemical applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 120 GPM 454 LPM 100 GPM 378 LPM
Max Head 41 FT 12.5 M 28.5 FT 8.7 M
Power 5 HP 3.7 KW 5 HP 3.7 KW
Electrical 208/230/460 60HZ & 190/380V 50HZ

Type Centrifugal Mag Drive
Inlet 3"MPT
Outlet 2"MPT
Wet End Natural Kynar (Front Housing, Rear Housing), Carbon Filled Kynar (Impeller), Viton (Gasket), Carbon (Bushing), Ceramic (Shaft, Thrust Washers)
Motor Options Available in 575V

Request Additional Product Info

icon March Pump TE-10K-MD 1750RPM Curve 60HZ 

icon March Pump TE-10K-MD 1750RPM Curve 50HZ 

Options:

Gasket: Viton or EPDM

Imp. Bushing: Carbon or Mica-Teflon (2 necessary)

Flanges Available

Reference Information

icon Dimensional Drawing TE-10K-MD-1750

icon TE-10K-MD 1750 DWG (290 KB) 

March Pump's industrial TE-10K-MD-1750 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 120 gallons per minute at 12 feet, and its maximum head is 41 Feet (or around 17.7PSI). The standard wet end (the materials that come into contact with the solution) is composed of natural Kynar (PVDF), carbon filled Kynar (PVDF), Viton, Carbon, and Ceramic. The inlet connection is 3 inch male pipe thread, and the outlet is 2 inch male pipe thread. The standard motor is a 3 Phase 5 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-10K-MD-1750 centrifugal magnetic drive pump is capable of handling mildly, or highly corrosive chemicals, acids, and solvents.  As the pump uses a 4 pole 1750RPM motor, the NPSHr is much lower then other pumps using a 2 pole motor, making this a Low NPSH pump.  To determine if the March TE-10K-MD-1750 is suitable for your application, please contact March Pump.

Perfect for Applications Including

Applications for the TE-10K-MD-1750 Magnetic Drive Pump include chemical recirculation, chemical transfer, deionized water systems, scrubber systems, detergent mixers, computer cooling, waste treatment plants, and plating operations. 

Great for Chemicals Including

The TE-10K-MD-1750 has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Hydrofluoric Acid, Hydrogen Peroxide, Nitric Acid, Phosphoric Acid, Potassium Chloride, Sodium Chloride, Sodium Hypochlorite, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals.  The TE-10K-MD-1750 may have been modified to handle these chemicals.  Please contact March Pump to review your application before using the TE-10K-MD-1750 for any of the above listed chemicals. Chemical Resistance Chart

Warranty 

March Manufacturing Inc. Warranty and Warranty Registration                                

Search Our Pumps Distributor Map