1U-MD Mag Drive Pump

March Pumpís 1U-MD centrifugal sealless magnetic drive submersible pumps ideal for chemical applications.
Unit 60HZ 50HZ
System US Metric US Metric
Max Flow 3 GPM 11.4 LPM 2.4 GPM 9 LPM
Max Head 4.6 FT 1.4 M 3.3 FT 1 M
Power .005 HP .003 KW .005 HP .003 KW
Electrical 115V 50/60HZ or 230V 50/60HZ
Submersible Yes

Type Centrifugal Mag Drive
Inlet Screen
Outlet 1/4"MPT
Wet End Polypropylene (Rear Housing, Impeller), Buna N (O-Ring), Cycolac (Cover), Carbon/Teflon (Thrust Washer), Delrin (Screen), 316 Stainless Steel (Shaft),
Uses Submersible Only
When submerged, the following is also in contact with the solution Epoxy, Noryl, Cycolac, Delrin, SJT Cord
P/N 0115-0007-0400 (115V)
P/N 0115-0007-0900 (230V)
Note Product image may be different than actual product received.

Request Additional Product Info

March 1U-MD Curve

March 1U-MD Pump Manual


Housings: Polypropylene or Carbon Filled Kynar

O-Ring: Buna N, Viton, Teflon, or Ethylene Propylene

Shaft: Ceramic or 316 Stainless Steel

Impeller: Nylon or Carbon Filled Kynar

Stainless Steel Base Available

Reference Information

Dimensional Drawing 1U-MD 115V

Dimensional Drawing 1U-MD 230V

March Pump's industrial 1U-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.5 Feet (or around 2PSI).  The 1U-MD pump must be used submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Carbon/Teflon, Stainless Steel, Cycolac, and Delrin.  When submerged, Epoxy, Noryl, Cycolac, and the SJT Cord are also in contact with the solution. The inlet connection is a screen, and the outlet is 1/4 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.005 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 160 Celsius in open air, or 87 Fahrenheit or 71 Celsius if submerged. The March 1U-MD centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals. To determine if the March 1U-MD is suitable for your application, please contact March Pump.

Perfect for Applications Including 

Applications for the 1U-MD Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.


March Manufacturing Inc. Warranty and Warranty Registration

WARNING:  Cancer and Reproductive Harm- www.P65Warnings.ca.gov 

Search Our Pumps Distributor Map