210-10 (5-350 cc/min)

March Pumpís 210-10 Metering Pump.
Unit System 60Hz 50Hz
Max Flow GPM LPM
Max Head FT M
Power .02 HP KW
Electrical 115 60HZ or 230V 50/60HZ

Type Metering Pump
Inlet 1/4"FPT
Outlet 1/4"FPT
Wet End Ryton, Ceramic, Viton, Teflon
Recommended for intermittent duty only

Request Additional Product Info

60HZ: Flow from 5 to 350 cc/min.  Max Head of 160PSI.

50HZ: Flow from 5 to 350 cc/min.  Max Head of 160PSI.

icon March 210-10 Pump Manual

Reference Information

icon Dimensional Drawing 210-10 115V

icon Dimensional Drawing 210-10 230V 

icon Dimensional Drawing 210-10 115V DWG (187 KB)

icon Dimensional Drawing 210-10 230V DWG (187 KB)

March Pump's industrial 210-10 is an American Metering Pump. It is capable of generating a controlled flow from 5cc to 350cc per minute, and its maximum pressure is 160PSI. The standard wet end (the materials that come into contact with the solution) is composed of Ryton, Ceramic, Viton, and Teflon. The inlet connection is 0.25 inch female pipe thread, and the outlet is 0.25 inch female pipe thread. The standard motor is a 115V or 230V 0.2 Horsepower motor, which can be run on 115V at 60 hertz or 230V on 50 or 60 hertz.  The maximum internal pressure the pump can tolerate is 160PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March 210-10 is capable of handling mild corrosive acids, alkalides, and salts. To determine if the March 210-10 metering pump is suitable for your application, please contact March Pump. 

Warranty

March Pumps are warranted to the original purchaser thereof to be free of defects in workmanship and materials under normal use for a period of twelve (12) months from the date of manufacture.  This warranty will be extended to (12) months from the date of original installation if the warranty card is completely filled in and returned to March or register online at www.marchpump.com/warranty-registraton   

This warranty covers only units properly installed and maintained in accordance with March instructions.  Any March pump which the purchaser considers to be defective must be returned to the source where it was purchased.  If the pump is found by March to be defective in workmanship or materials under normal use within the warranty period March, at its option, will either replace or repair the pump.  This warranty does not cover any costs associated with the installation or removal of the pump.  If the pump was damaged in transit, you should file a claim with the carrier. 

Before using the pump, the purchaser or installer should determine the suitability of the pump for its intended use.  Purchaser assumes all risk and liability whatsoever in connection with such use or installation.   

MARCH'S SOLE LIABILITY AND THE SOLE REMEDY FOR ANY BREACH OF WARRANTY SHALL BE AS SET FORTH ABOVE.  THE WARRANTY SET FORTH ABOVE IS IN LIEU OF ALL OTHER WARRANTIES OF MARCH.  WHETHER WRITTEN, ORAL OR IMPLIED, AND MARCH HEREBY DISCLAIMS ANY OTHER REPRESENTATION OR WARRANTY EITHER EXPRESSED OR IMPLIED AS TO ANY MATTER WHATSOEVER, INCLUDING WITHOUT LIMITATION THE DESIGN OF THE PUMP.  ITS MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE AND ITS CONFORMITY TO THE PROVISIONS AND SPECIFICATIONS OF ANY PURCHASE ORDER, ORDER OR OTHER DOCUMENT OR STATEMENT RELATING THERETO.  IN NO EVENT SHALL MARCH BE LIABLE FOR LIQUIDATED, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING STRICT LIABILITY IN TORT, LOSS OF PRODUCTION OR DELAYS IN CONSTRUCTION).   

Chemical Disclaimer


The user must exercise primary responsibility in selecting the product's materials of construction, which are compatible with the liquid/s that come in contact with the product.  The user may consult March Manufacturing or a distributor to seek a recommendation of the product's materials of construction that the offers the optimum available chemical compatibility.  However neither March or the distributor shall be liable for product damage or failure, injuries, or any other damage or loss arising out of a reaction, interaction or any chemical effect that occurs between the materials of the product's construction and the liquids that come into contact the product.          

                               
Search Our Pumps Distributor Map