809-PL Mag Drive Pump
|Max Flow||4.5 GPM||17 LPM||2.7 GPM||10.3 LPM|
|Max Head||4.3 FT||1.3 M||3 FT||.92 M|
|Power||.01 HP||.007 KW||.01 HP||.007 KW|
|Electrical||115V 50/60HZ or 230V 50/60HZ|
|Type||Centrifugal Mag Drive|
|Wet End||Polysulfone (Front Housing), Stainless Steel (Rear Housing, Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)|
|Note||Product image may be different than actual product received.|
March Pump's industrial 809-PL is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 4.5 gallons per minute at 0.5 feet, and its maximum head is 4.3 Feet (or around 1.8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polysulfone, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 1/2 inch male pipe thread, and the outlet is 1/2 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.01 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. To determine if the March 809-PL is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the 809-PL Magnetic Drive Pump include hot water systems, solar heating, and fryers.
Great for Chemicals Including
The 809-PL has pumped Cutting Oils, Ethylene Glycol, Hot Water, Hot Wort and Salt Water. The 809-PL may have been modified to handle these chemicals. Please contact March Pump to review your application before using the 809-PL for any of the above listed chemicals. Chemical Resistance Chart
WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov