MDXT-3-AM Magnetic Drive Pump
|Max Flow||10 GPM||37 LPM|
|Max Head||29 FT||8.8 M|
|Power||.125 HP||.093 KW|
|Electrical||21PSI or 3CFM|
|Wet End||Polypropylene (Front and Rear Housing, Impeller), Ceramic (Shaft, Thrust Washer), Buna N (O-Ring), Ceramic Magnet|
O-Ring: Buna N or Viton
March Pump's industrial MDXT-3-AM is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 10 gallons per minute at 1 foot, and its maximum head is 29 Feet (or around 12.5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Ceramic, and Ceramic Magnet. The inlet connection is 0.5 inch female pipe thread, and the outlet is 0.375 inch female pipe thread. The standard motor is a 0.125 Horsepower compressed air motor which requires 21PSI. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March MDXT-3-AM centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March MDXT-3-AM is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the MDXT-3-AM Magnetic Drive Pump includes chemical transfer and chemical recirculation.
Great for Chemicals Including
The MDXT-3-AM has pumped has pumped Acetic Acid, Acetone, Ammonium Sulfate, Citric Acid, Ethylene Glycol, Ferric Sulfate, Hydrogen Peroxide, Potassium Hydroxide, Sodium Chloride, Fresh Water, Salt Water, DI Water, and many more chemicals. The MDXT-3-AM may have been modified to handle these chemicals. Please contact March Pump to review your application before using the MDXT-3-AM for any of the above listed chemicals.
Chemical Resistance Chart
March pumps are guaranteed against defects in materials or workmanship for one year from the date of manufacture. Warranty will be extended for up to one year from the date of purchase, provided that the warranty card is returned to the factory within 10 days of the purchase date.
In all events, liability is limited to the purchase price and to the placement or repair of any pump or parts defective in materials or workmanship. All pumps for which a warranty claim is made must be returned to the factory with shipping costs prepaid. This warranty is void if the pump has been subjected to misuse or negligence. This warranty applies only to pumps used to pump water. For applications with all other solutions, contact the factory for verification of warranty terms before the pump is installed.