MDX-MT3 Magnetic Drive Pump
| Max Flow | 8 GPM | 30 LPM |
|---|---|---|
| Max Head | 16 FT | 3.5 M |
| Power | .04 HP | .029 KW |
| Electrical | 115V 50/60HZ or 230V 50/60HZ | |
| Submersible | Non-Submersible | |
| 60HZ | 50HZ | |
| Inlet | 1/2"MPT |
|---|---|
| Outlet | 1/2"MPT |
| Wet End | Ryton (Front and Rear Housing, Impeller), Ceramic (Shaft, Thrust Washer), Viton (O-Ring) |
Options:
O-Ring: Viton, Teflon, or Ethylene Propylene
The front housing, rear housing, and impeller are available in Polypropylene.
Dimensional Drawing MDX-MT3 115V
Dimensional Drawing MDX-MT3 230V
Dimensional Drawing MDX-MT3 115V DWG (109 KB)
Dimensional Drawing MDX-MT3 230V DWG (109 KB)
March Pump's industrial MDX-MT3 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 8 gallons per minute at 1 foot, and its maximum head is 16 Feet (or around 7PSI). The standard wet end (the materials that come into contact with the solution) is composed of Ryton, Viton, and Ceramic. The inlet connection is 0.5 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March MDX-MT3 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March MDX-MT3 is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the MDX-MT3 Magnetic Drive Pump include etching equipment, photographic processing equipment, ice flakers, plate procesors, and marine air conditioning.
Great for Chemicals Including
The MDX-MT3 has pumped Acetic Acid, Acetone, Benzene Sulfonic Acid, Citric Acid, Ethanolamine, Freon 11, Potassium Hydroxide, Potassium Permanganate, Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, DI Water, and many more chemicals. The MDX-MT3 may have been modified to handle these chemicals. Please contact March Pump to review your application before using the MDX-MT3 for any of the above listed chemicals.
Chemical Resistance Chart
Warranty
March pumps are guaranteed against defects in materials or workmanship for one year from the date of manufacture. Warranty will be extended for up to one year from the date of purchase, provided that the warranty card is returned to the factory within 10 days of the purchase date.
In all events, liability is limited to the purchase price and to the placement or repair of any pump or parts defective in materials or workmanship. All pumps for which a warranty claim is made must be returned to the factory with shipping costs prepaid. This warranty is void if the pump has been subjected to misuse or negligence. This warranty applies only to pumps used to pump water. For applications with all other solutions, contact the factory for verification of warranty terms before the pump is installed.
