MDX-3-1/2 Magnetic Drive Pump
| Max Flow | 8.5 GPM | 30 LPM |
|---|---|---|
| Max Head | 19 FT | 4 M |
| Power | .04 HP | .029 KW |
| Electrical | 115V 50/60HZ or 230V 50/60HZ | |
| Submersible | Non-Submersible | |
| 60HZ | 50HZ | |
| Inlet | 1/2"OD |
|---|---|
| Outlet | 1/2"OD |
| Wet End | Polypropylene (Front Housing), Carbon filled Kynar (Rear Housing, Shaft), Ryton (Thrust Washer), Buna N (O-Ring), Stainless Steel (Screw) Ceramic Magnet |
Options:
O-Ring: Buna N, Viton, or Ethylene Propylene
Dimensional Drawing MDX-3-1/2 115V
Dimensional Drawing MDX-3-1/2 230V
Dimensional Drawing MDX-3-1/2 115V DWG (118 KB)
Dimensional Drawing MDX-3-1/2 230V DWG (127 KB)
March Pump's industrial MDX-3-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 8 gallons per minute at 1 foot, and its maximum head is 19 Feet (or around 8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, carbon filled Kynar (PVDF), Ryton Buna N, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March MDX-3-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March MDX-3-1/2 is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the MDX-3-1/2 Magnetic Drive Pump include etching equipment, photographic processing equipment, ice flakers, plate procesors, and marine air conditioning.
Great for Chemicals Including
The MDX-3-1/2 has pumped Acetic Acid, Ammonium Hydroxide, Potassium Carbonate, Sodium Chloride, Sodium Cyanide, Sodium Nitrate, Zinc Sulfate, Fresh Water, Salt Water, and many more chemicals. The MDX-3-1/2 may have been modified to handle these chemicals. Please contact March Pump to review your application before using the MDX-3-1/2 for any of the above listed chemicals. Chemical Resistance Chart
Warranty
March pumps are guaranteed against defects in materials or workmanship for one year from the date of manufacture. Warranty will be extended for up to one year from the date of purchase, provided that the warranty card is returned to the factory within 10 days of the purchase date.
In all events, liability is limited to the purchase price and to the placement or repair of any pump or parts defective in materials or workmanship. All pumps for which a warranty claim is made must be returned to the factory with shipping costs prepaid. This warranty is void if the pump has been subjected to misuse or negligence. This warranty applies only to pumps used to pump water. For applications with all other solutions, contact the factory for verification of warranty terms before the pump is installed.
