893-03 Brush 12V 1 AMP DC
| Max Flow | 2.7 GPM | 11 LPM |
|---|---|---|
| Max Head | 10.6 FT | 3.3 M |
| Power | 0.006 HP | 0.004 KW |
| Electrical | 12V Range 0-14 | |
| Submersible | Non-Submersible | |
| Inlet | 3/8" FPT |
|---|---|
| Outlet | 3/8" OD |
| Wet End | Noryl (Front and Rear Housings), Nylon (Impeller), Carbon/Teflon (Thrust Washer), Buna N (O-Ring), 316 Stainless Steel (Shaft), Ceramic Magnet |
Options:
O-Ring: Buna N, Viton, Teflon, or Ethylene Propylene
Shaft: Ceramic or Stainless Steel
Series 1-MD Wet Ends may be used on Series 893
Dimensional Drawing 893-03 DWG (146 KB)
March Pump's industrial 893-03 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and solar equipment. It is capable of generating a maximum flow of 2.7 gallons per minute at 1 foot, and its maximum head is 10.6 Feet (or around 4.5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Noryl, Nylon, Carbon/Teflon, Buna N, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch female pipe thread, and the outlet is 0.375 inch smooth. The standard motor is a 0.006 Horsepower DC Brushtype Motor, available in 12 Volts. The 12 Volt Motor has an operating range from 0 to 14 Volts. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March 893-03 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March 893-03 is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the 893-03 Magnetic Drive Pump include computer cooling, photographic processing equipment, refrigeration systems, and water displays.
Warranty
March pumps are guaranteed against defects in materials or workmanship for one year from the date of manufacture. Warranty will be extended for up to one year from the date of purchase, provided that the warranty card is returned to the factory within 10 days of the purchase date.
In all events, liability is limited to the purchase price and to the placement or repair of any pump or parts defective in materials or workmanship. All pumps for which a warranty claim is made must be returned to the factory with shipping costs prepaid. This warranty is void if the pump has been subjected to misuse or negligence. This warranty applies only to pumps used to pump water. For applications with all other solutions, contact the factory for verification of warranty terms before the pump is installed.
