815-PL Beer Pump
| Max Flow | 7 GPM | 22.7 LPM |
|---|---|---|
| Max Head | 18.6 FT | 4.1 M |
| Power | .04 HP | .029 KW |
| Electrical | 115V 50/60HZ | |
| Submersible | Non-Submersible | |
| 60HZ | 50HZ | |
| Inlet | 1/2"MPT |
|---|---|
| Outlet | 1/2"MPT |
| Wet End | Polysulfone (Front Housing), Stainless Steel (Rear Housing), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller) |
| Can handle liquids of 250F | Materials are FDA Food Compliant |
| With 6 Foot Cord and Plug | Components are UL Recognized |
| American Made |
Dimensional Drawing 815-PL Beer Pump
Dimensional Drawing 815-PL Beer Pump DWG(148 KB)
March Pump's 815-PL Beer Pump is an American seal-less centrifugal magnetic drive pump ideal for home brewing. It is capable of generating a maximum flow of 7 gallons per minute at 4.5 feet, and its maximum head is 18.6 Feet (or around 8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polysulfone, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.5 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The 815-PL Beer Pump motor has a six foot cord, a plug, and a base. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. To determine if the March 815-PL Beer Pump is suitable for your application, please contact March Pump.
Great for Chemicals Including
The 815-PL Beer Pump has pumped Hot Water and Hot Wort. The 815-PL Beer Pump may have been modified to handle these chemicals. Please contact March Pump to review your application before using the 815-PL Beer Pump for any of the above listed chemicals.
Warranty
March pumps are guaranteed against defects in materials or workmanship for one year from the date of manufacture. Warranty will be extended for up to one year from the date of purchase, provided that the warranty card is returned to the factory within 10 days of the purchase date.
In all events, liability is limited to the purchase price and to the placement or repair of any pump or parts defective in materials or workmanship. All pumps for which a warranty claim is made must be returned to the factory with shipping costs prepaid. This warranty is void if the pump has been subjected to misuse or negligence. This warranty applies only to pumps used to pump water. For applications with all other solutions, contact the factory for verification of warranty terms before the pump is installed.
