809-PL-C 12V & 24V Mag Drive Pump
| Max Flow | 6 GPM | 22.7 LPM |
|---|---|---|
| Max Head | 7.1 FT | 2.1 M |
| Power | .01 HP | .007 KW |
| Electrical | 12V Range 0-14 or 24V Range 0-26 | |
| Submersible | Non-Submersible | |
| Inlet | 3/8"FPT & 3/4"MPT |
|---|---|
| Outlet | 1/2"MPT |
| Wet End | Polysulfone (Front Housing), Stainless Steel (Rear Housing), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller) |
809-PL-C 12V & 24V Pump Manual
Dimensional Drawing 809-PL-C 12V
Dimensional Drawing 809-PL-C 12V DWG (90 KB)
Dimensional Drawing 809-PL-C 24V
Dimensional Drawing 809-PL-C 24V DWG (89 KB)
March Pump's industrial 809-PL-C 12V & 24V is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 6 gallons per minute at 1 foot, and its maximum head is 7 Feet (or around 3PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polysulfone, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.375 inch male pipe thread and 0.75 female pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 0.01 Horsepower DC Brush Type Motor, available in 12 or 24 Volts. The 12 Volt motor has an operating range from 0 to 14 Volts, and the 24 Volt motor has an operating range from 0 to 26 Volts. The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. To determine if the March 809-PL-C 12V & 24V is suitable for your application, please contact March Pump.
Perfect for Applications Including
Applications for the 809-PL-C 12V & 24V Magnetic Drive Pump include hot water systems, solar heating, and fryers.
Great for Chemicals Including
The 809-PL-C 12V & 24V has pumped Cutting Oils, Ethylene Glycol, Hot Water, Hot Wort and Salt Water. The 809-PL-C 12V & 24V may have been modified to handle these chemicals. Please contact March Pump to review your application before using the 809-PL-C 12V & 24V for any of the above listed chemicals. Chemical Resistance Chart
Warranty
March pumps are guaranteed against defects in materials or workmanship for one year from the date of manufacture. Warranty will be extended for up to one year from the date of purchase, provided that the warranty card is returned to the factory within 10 days of the purchase date.
In all events, liability is limited to the purchase price and to the placement or repair of any pump or parts defective in materials or workmanship. All pumps for which a warranty claim is made must be returned to the factory with shipping costs prepaid. This warranty is void if the pump has been subjected to misuse or negligence. This warranty applies only to pumps used to pump water. For applications with all other solutions, contact the factory for verification of warranty terms before the pump is installed.
