320-CP-MD Magnetic Drive Pump
| Max Flow | 3.3 GPM | 11.3 LPM |
|---|---|---|
| Max Head | 40 FT | 8.8 M |
| Power | .083 HP | .062 KW |
| Electrical | 115V 50/60HZ or 230V 50/60HZ | |
| Submersible | Non-Submersible | |
| 60HZ | 50HZ | |
| Inlet | 1/2"MPT |
|---|---|
| Outlet | 3/8"MPT |
| Wet End | Polypropylene (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft and Thurst Washer) |
| Motor Options | Air Cooled or Blast Cooled |
Options:
O-Ring: Viton or Ethylene Propylene
Dimensional Drawing 320-CP-MD 115V
Dimensional Drawing 320-CP-MD 115V DWG (116 KB)
Dimensional Drawing 320-CP-MD 230V
Dimensional Drawing 320-CP-MD 230V DWG (111 KB)
March Pump's industrial 320-CP-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3.3 gallons per minute at 1 feet, and its maximum head is 40 Feet (or around 17PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, and Ceramic. The inlet connection is 0.5 inch male pipe thread, and the outlet is 0.375 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.83 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March 320-CP-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March 320-CP-MD is suitable for your application, please contact March Pump.
Perfect for Applications Including
The 320-CP-MD has the durability for continuous duty in applications requiring low flow and high head. Typical applications include laser cooling, medical systems, filter systems, and various processing equipment in the electronics industry.
Great for Chemicals Including
The 320-CP-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The 320-CP-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the 320-CP-MD for any of the above listed chemicals. Chemical Resistance Chart
Warranty
March pumps are guaranteed against defects in materials or workmanship for one year from the date of manufacture. Warranty will be extended for up to one year from the date of purchase, provided that the warranty card is returned to the factory within 10 days of the purchase date.
In all events, liability is limited to the purchase price and to the placement or repair of any pump or parts defective in materials or workmanship. All pumps for which a warranty claim is made must be returned to the factory with shipping costs prepaid. This warranty is void if the pump has been subjected to misuse or negligence. This warranty applies only to pumps used to pump water. For applications with all other solutions, contact the factory for verification of warranty terms before the pump is installed.
